Basic
| Feature Code |
Name |
Detail
|
| *1
|
Call Transfer
|
Transfer a call to another extension
|
| *2
|
Record Active Call
|
|
| *347
|
Directory
|
*DIR to dial by name.
|
| *3472
|
DISA
|
*DISA followed by Administrative PIN to receive a dialtone and call out.
|
| *5900
|
Park
|
Park a call.
|
| *5901
|
Un-Park
|
Un-Park (retrieve) a call.
|
| *6000
|
Valet Park
|
Attended Transfer (park). The park extension will be played back to you.
|
| *6001-6099
|
Valet Un-Park
|
Retrieve a Valet Parked call.
|
| *67 <phone number>
|
Call Privacy
|
Activate call privacy
|
| *69
|
Call Return
|
Call back the last incoming number
|
| *732
|
Record
|
*REC followed by Administrative PIN to record a message.
|
| *870
|
Redial
|
Redial a number
|
| *xx
|
Talking Date
|
To Do
|
| *xx
|
Talking Time
|
To Do
|
| *xx
|
Talking Date & Time
|
To Do
|
| *xx
|
Wakeup Call
|
To Do
|
Voicemail
| Feature Code |
Name |
Detail
|
| *97
|
Generic Voicemail
|
The system will prompt for both your id (extension number) and password
|
| *4000
|
Generic Voicemail
|
The system will prompt for both your id (extension number) and password
|
| *98
|
Voicemail
|
The system detects the extension, and will prompt for your password
|
| *99 <extension>
|
Send to Voicemail
|
Send a call directly to voicemail
|
Conference
| Feature Code |
Name |
Detail
|
| *3001-3099
|
Conference (8khz)
|
Conference rooms with 8khz (cellphone quality) audio
|
| *3101-3199
|
Conference (16khz)
|
Conference rooms with 16khz audio
|
| *3201-3299
|
Conference (32khz)
|
Conference room with 32khz audio
|
| *3301-3399
|
Conference (48khz)
|
Conference room with 48khz (cd quality) audio
|
|
|
|
Additional Conference numbers can be added via the GUI.
|
Group
| Feature Code |
Name |
Detail
|
| *8
|
Group Intercept
|
|
| *80 <group ID>
|
Delete from Group
|
Remove extension from a group using 2 digit group ID. See Call Groups.
|
| **81 <group ID>
|
Add to Group
|
Add extension to a group using 2 digit group ID. See Call Groups.
|
| **82 <group ID>
|
Simultaneous Ring
|
Ring an entire group simultaneously (using a 2 digit group ID)
|
| **83 <group ID>
|
Sequential Ring
|
Ring an entire group sequentially (using a 2 digit group ID)
|
| **2001
|
Ring Billing
|
Ring the Billing Group
|
| **2002
|
Ring Support
|
Ring the Support Group
|
Miscellaneous
| Feature Code |
Name |
Detail
|
| *9192
|
Info
|
Sends information to the console
|
| *9193
|
Video Record
|
Record Video
|
| *9194
|
Video Playback
|
Playback Video
|
| *9195
|
Delay Echo
|
Audio is played back after a slight delay
|
| *9196
|
Echo Test
|
Echo Test
|
| *9197
|
Milliwatt Tone
|
Tone Playback
|
| *9198
|
Test Tone
|
Tone Playback
|
| *9664
|
Test MoH
|
Test Music on Hold
|
| *5000
|
Default Attendant
|
Call the default auto-attendant
|
Advanced
| Feature Code |
Name |
Detail
|
| *8 <ext>
|
Intercom
|
Use Intercom on extension
|
| *88 <ext>
|
Eavesdrop
|
Listen to the call. Press 1 for remote, 2 for local, 3 for full conversation
|
| *886
|
Global Intercept
|
Intercept a call that is ringing
|
| ** <ext>
|
Intercept an extension
|
| **8 <ext>
|
Intercept an extension
|
Warning
Note: Feature Codes are defined in the default dial plan, however this is not updated when you update FusionPBX. Therefore if your original installation of FusionPBX was a while back you might not have access to all these feature codes. To update manually, you can pull the latest version from http://code.google.com/p/fusionpbx/source/browse/trunk/fusionpbx/includes/install/dialplan/default.xml
Setting up a call forwarding feature code
[Talking Clock]
