Difference between revisions of "Installing FusionPBX behind pfSense"
From FusionPBX
(Created page with "First we need to config pfSense to open the necessary ports for FusionPBX and Freeswitch In pfSense navigate to '''Firewall >> Aliases''' and click on the Ports TAB. '''Name...") |
|||
| Line 3: | Line 3: | ||
In pfSense navigate to '''Firewall >> Aliases''' and click on the Ports TAB. | In pfSense navigate to '''Firewall >> Aliases''' and click on the Ports TAB. | ||
| − | '''Name:''' PBX | + | '''Name:''' PBX/n |
'''Description:''' FusionPBX | '''Description:''' FusionPBX | ||
'''Type:''' Ports | '''Type:''' Ports | ||
Revision as of 20:59, 1 April 2014
First we need to config pfSense to open the necessary ports for FusionPBX and Freeswitch
In pfSense navigate to Firewall >> Aliases and click on the Ports TAB.
Name: PBX/n Description: FusionPBX Type: Ports
Then proceed to add the ports as follows:
Port Description 80 HTTP 443 HTTPS 5060:5061 SIP Internal 5080:5081 SIP External 16384:32768 RTP
After you are finished Click SAVE
Configure Port Forwarding
Click on the '+' to add a new Entry
Firewall: NAT: Port Forward: Edit
Interface: WAN Protocol: TCP/UDP Destination: <<Select a Public IP from the List>> Destination Port Range:
from: (Other) PBX to: (Other) PBX
Redirect target IP: 10.10.0.10 Redirect target port: (Other) PBX
Description: FusionPBX NAT reflection: Use system default
Click SAVE when done.
