Difference between revisions of "Feature Codes"

Revision as of 05:41, 2 October 2014

Feature Code	Name	Detail
*1	Call Transfer	Transfer a call to another extension
*2	Record Active Call
*4	Attended Call Transfer	Attended call transfer to another extension. After extension number press #
*347	Directory	*DIR to dial by name.
*3472	DISA	*DISA followed by Administrative PIN to receive a dialtone and call out.
*5900	Park	Park a call.
*5901	Un-Park	Un-Park (retrieve) a call.
*6000	Valet Park	Attended Transfer (park). The park extension will be played back to you.
*6001-6099	Valet Un-Park	Retrieve a Valet Parked call.
*67 <phone number>	Call Privacy	Activate call privacy
*69	Call Return	Call back the last incoming number
*732	Record	*REC followed by Administrative PIN to record a message.
*8[ext]	Extension Intercom	Page a specific extension.
*870	Redial	Redial a number
*xx	Talking Date	To Do
*xx	Talking Time	To Do
*xx	Talking Date & Time	To Do
*925	Wakeup Call	Schedule a wakeup call

Feature Code	Name	Detail
*97	Voicemail	The system detects the extension, and will prompt for your password
*98	Check any Voicemail box	The system will prompt for both your id (extension number) and password
*4000	Check any Voicemail box	The system will prompt for both your id (extension number) and password
*99 <extension>	Send to Voicemail	Send a call directly to voicemail

Feature Code	Name	Detail
*3001-3099	Conference (8khz)	Conference rooms with 8khz (cellphone quality) audio
*3101-3199	Conference (16khz)	Conference rooms with 16khz audio
*3201-3299	Conference (32khz)	Conference room with 32khz audio
*3301-3399	Conference (48khz)	Conference room with 48khz (cd quality) audio
		Additional Conference numbers can be added via the GUI.

Feature Code	Name	Detail
*8	Group Intercept
*80 <group ID>	Delete from Group	Remove extension from a group using 2 digit group ID. See Call Groups.
**81 <group ID>	Add to Group	Add extension to a group using 2 digit group ID. See Call Groups.
**82 <group ID>	Simultaneous Ring	Ring an entire group simultaneously (using a 2 digit group ID)
**83 <group ID>	Sequential Ring	Ring an entire group sequentially (using a 2 digit group ID)
**2001	Ring Billing	Ring the Billing Group
**2002	Ring Support	Ring the Support Group

Feature Code	Name	Detail
*9192	Info	Sends information to the console
*9193	Video Record	Record Video
*9194	Video Playback	Playback Video
*9195	Delay Echo	Audio is played back after a slight delay
*9196	Echo Test	Echo Test
*9197	Milliwatt Tone	Tone Playback
*9198	Test Tone	Tone Playback
*9664	Test MoH	Test Music on Hold
*5000	Default Attendant	Call the default auto-attendant

Feature Code	Name	Detail
*8 <ext>	Intercom	Use Intercom on extension
*88 <ext>	Eavesdrop	Listen to the call. Press 1 for remote, 2 for local, 3 for full conversation
*886	Global Intercept	Intercept a call that is ringing
** <ext>	Intercept an extension
**8 <ext>	Intercept an extension

Note: Feature Codes are defined in the default dial plan, however this is not updated when you update FusionPBX. Therefore if your original installation of FusionPBX was a while back you might not have access to all these feature codes. To update manually, you can pull the latest version from http://code.google.com/p/fusionpbx/source/browse/trunk/fusionpbx/includes/install/dialplan/default.xml

Setting up a call forwarding feature code
[Talking Clock]

@@ Line 53: / Line 53: @@
 |-
 | *8[ext]
+| Extension Intercom
 | Page a specific extension.
 |-