Difference between revisions of "Extensions"

Latest revision as of 23:32, 23 November 2015

Menu: (Apps-Extensions)

Each phone on the PBX is setup to register to one or more extension numbers.

Basic Setup

• To add an extension go to the Menu -> Accounts -> Extensions and press the add button.
• Set an extension number
• the rest of the defaults are fine for a basic example.
• Press save.
• Hover over the password input, it will allow you to see/copy the password

Passwords

FusionBPX automatically generates a password for the extension. It is randomly created (symbols, letters, numbers). You can find this password after you create the extension.

• Menu -> Accounts -> Extensions
  • click 'e' to edit the extension you need to see
    • find the password field
    • click inside the field of bullets
      • FusionPBX will display the password to you so you can see it and copy/paste on the line below.
• Alternatively, you can do:
  • less [freeswitch_config_dir]/directory/default/v_ExtensionNumber.xml

Registering Phones

For most things your extension number is your username, and password is [see above]. You'll also need to put your ip address, or DNS name in the proper place.

Examples

Polycom

Soundpoint IP 320P

Identification

Display Name: FusionPBX

Address: ExtensionNumber

Authentication User ID: ExtensionNumber

Authentication Password: PASSWORD

Label: ExtensionNumber or Whatever

Type: Private

Third Party Name: BLANK

Number Of Line Keys: BLANK

Calls Per Line: BLANK

Server 1

Address: FusionBPX IP ADDRESS or DOMAIN NAME if doing multi-tenant

Port: 5060

Transport: DNSnaptr works or UDP or whatever

Expires: default (30 works ok NATTED)

Register: BLANK

Retry Timeout: BLANK

Retry Maximum Count: BLANK

Line Seize Timeout: BLANK

Server 2

leave alone

Call Diversion

leave alone

Message Center

Subscriber: BLANK

Callback Mode: Contact

Callback Contact: *98

Options

Extension What is used to register the phone (typically your extension number but can be any alphanumeric) used to register phone in the field user ID, username etc.

Number Alias The number you can dial to get this extension if the extension is non numerical.

Range used to setup one or more extensions. In other words this can be used to create extension in bulk from 1 to 1000 extensions.
If the checkbox for Auto-generate user with extension as login name is checked, User List is ignored, and a user is created and linked to the extension.
A printable List of usernames and randomly generated passwords is dumped to screen so can capture them for later.

Effective Caller ID Name: is used when calling internal numbers. ( effective_caller_id_name - FreeSWITCH variable )

Effective Caller ID Number: is used when when calling internal numbers. ( effective_caller_id_number - FreeSWITCH variable )
The Effective Caller Name and Number are also used to populate the voicemail Subject line information.

Outbound Caller ID Name: is used when calling external numbers. ( outbound_caller_id_name - General variable )

Outbound Caller ID Number: is used when calling external numbers. ( outbound_caller_id_number - General variable )

Caller ID notes:
Effective caller id is the real caller id however people tend to like and internal caller id for extensions and an external caller id when calling 
out the gateways so when calling out a gateway if you were to look at the outbound route in the edit window as a superadmin users you would see
that when going out the gateway it sets the outbound caller id to the effective caller id the effect is this on the extension you set the effective
caller id to the internal caller id info the number as the extension number then you set the outbound caller id as the external caller id.  This is
used to set the outbound caller ID effective_caller_id_name=${outbound_caller_id_name}.  The Outbound caller ID variable doesn't exist in FreeSWITCH,
it is a feature of FusionPBX.  You can set the caller id either on an outbound route or on an extension.

Account Code - this is not used anywhere in the default dialplan but is provided in FreeSwitch and therefore is provided in FusionPBX for full compatibility. It sets a variable for the extension that could be used in a condition. See Variable accountcode for more information. Note that it can be used to affect the operation of CDR.

Functionality for phone provisioning is now provided on this screen, but has not yet been documented here.

Directory Full Name This is the name that will be used for a *411 or Company Directory lookup as often used in IVR.

Notes

The password is set automatically using a combination of random characters that are:

• upper and lower case letters,
• numbers
• symbols

Rather than changing the password to something simple it is much wiser to keep it as it was automatically set and to use that password to connect the phone with. To view the password that has been automatically set, open the extension page again and click on the obfuscated password in the password field. The actual password will be revealed just below the password field.

Notes on Toll Allow

Toll Allow is a variable that can be set per extension. It allows you to limit who can make what type of calls. Note that although the variable is provided in the extension configuration, the default dialplan DOES NOT make use of it. Therefore if you want to use it you need to add statements to the dialplan to enable it.

The following are notes on Toll Allow that were captured from IRC discussions on the topic. This needs to be updated by someone who understands it or has used it:

An example for the contents of the toll_allow variable would be:
<variable name="toll_allow" value="domestic,local"/>

You can then add information to your dialplan to process this variable.  In the example XML below, if the valid allow value isn't present then
an extension shouldn't be able to dial out.  However extension -> extension should still work.

The following code are example XML for standard outbound routes (Dialplan->OutboundRoutes).  Effectively you are applying an additional  
condition to EACH outbound route that you want to limit.  So in the FusionPBX GUI select an outbound route and add a condition, type  
"${toll_allow}", data "local".  Order is important, this should be the FIRST condition of your outbound route.
You'll need to do that for all of your outbound routes, tag them local, domestic, or international depending on what they are.
On some installations this example file will be present in /usr/local/freeswitch/conf/dialplan/default/01_example.com.xml: 

<include>
 <extension name="local.example.com">
   <condition field="${toll_allow}" expression="local"/>
   <condition field="destination_number" expression="^(\d{7})$">
     <action application="set" data="effective_caller_id_number=${outbound_caller_id_number}"/>
     <action application="set" data="effective_caller_id_name=${outbound_caller_id_name}"/>
     <action application="bridge" data="sofia/gateway/${default_gateway}/1${default_areacode}$1"/>
   </condition>
 </extension>

 <extension name="domestic.example.com">
   <condition field="${toll_allow}" expression="domestic"/>
   <condition field="destination_number" expression="^(\d{11})$">
     <action application="set" data="effective_caller_id_number=${outbound_caller_id_number}"/>
     <action application="set" data="effective_caller_id_name=${outbound_caller_id_name}"/>
     <action application="bridge" data="sofia/gateway/${default_gateway}/$1"/>
   </condition>
 </extension>

 <extension name="international.example.com">
   <condition field="${toll_allow}" expression="international"/>
   <condition field="destination_number" expression="^(011\d+)$">
     <action application="set" data="effective_caller_id_number=${outbound_caller_id_number}"/>
     <action application="set" data="effective_caller_id_name=${outbound_caller_id_name}"/>
     <action application="bridge" data="sofia/gateway/${default_gateway}/$1"/>
   </condition>
 </extension>
</include>

The above example is how to PERMIT calls. The example below takes the opposite approach and is how to PREVENT calls. Effectively, the above example assumes all calls are bad (except internal) unless they are flagged as good by the value of the toll_allow variable. The below example takes the opposite approach - it assumes that all calls are good unless they are flagged as bad.

Put this in your advanced dialplan. In the toll allow of whatever extension you wanted to restrict put the value 'local'.  This example 
restricts from calling 10 or 11 digit numbers.

<extension name="localcalls" >
 <condition field="${toll_allow}" expression="local"/>
  <condition field="destination_number" expression="(^\d{10}$|^\d{11}$)">
   <action application="hangup"/>
 </condition>
</extension>

See also

• Getting Started