Difference between revisions of "FreeSWITCH compile"

Revision as of 19:56, 31 March 2015

Upgrade Move Source

mv /usr/src/freeswitch freeswitch-version

Git Release

cd /usr/src
git clone -b v1.4 https://freeswitch.org/stash/scm/fs/freeswitch.git
cd freeswitch
./bootstrap.sh

or

Git Head

cd /usr/src
git clone https://freeswitch.org/stash/scm/fs/freeswitch.git
cd freeswitch
./bootstrap.sh

or

files.freeswitch.org

cd /usr/src
wget http://files.freeswitch.org/freeswitch-1.4.18.zip
unzip freeswitch-1.4.18.zip
cd freeswitch-1.4.18

Ubuntu Dependencies

apt-get install autoconf automake devscripts gawk g++ git-core libjpeg-dev libncurses5-dev libtool make python-dev gawk pkg-config libtiff-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns-dev libpq-dev memcached libmemcached-dev

Debian Dependencies

apt-get install autoconf automake devscripts gawk g++ git-core libjpeg-dev libncurses5-dev libtool libtool-bin make python-dev gawk pkg-config libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns-dev libpq-dev memcached libmemcached-dev

CentOS

yum install git gcc-c++ autoconf automake libtool wget python ncurses-devel zlib-devel libjpeg-devel openssl-devel e2fsprogs-devel sqlite-devel libcurl-devel pcre-devel speex-devel ldns-devel libedit-devel libmemcached-devel

Configure services to auto start

chkconfig --add memcached && chkconfig --levels 33 memcached on
chkconfig --add freeswitch && chkconfig --levels 35 freeswitch on

modules.conf

uncomment the FreeSWITCH modules that are needed.

mod_avmd
mod_callcenter
mod_memcache
mod_cidlookup
mod_curl

Used for MP3 support

mod_shout

Postgres driver

./configure --enable-core-pgsql-support

Run Make

make

Remove FreeSWITCH files

This steop is only needed for a FreeSWITCH upgarde. Once it has been confirmed that the compile was successful then remove files from previous version of FreeSWITCH

rm -rf /usr/local/freeswitch/{lib,mod,bin}/*

Install

make install

Install Sound Files

make cd-sounds-install cd-moh-install

Installing the script

Run on new install only. Create the file '/etc/init.d/freeswitch' with the following code:

#!/bin/bash
### BEGIN INIT INFO
# Provides:          freeswitch
# Required-Start:    $local_fs $remote_fs
# Required-Stop:     $local_fs $remote_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Description:       Freeswitch debian init script.
# Author:            Matthew Williams
#
### END INIT INFO
# Do NOT "set -e"

# PATH should only include /usr/* if it runs after the mountnfs.sh script
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/bin
DESC="Freeswitch"
NAME=freeswitch
DAEMON=/usr/local/freeswitch/bin/$NAME
DAEMON_ARGS="-nc -nonat -reincarnate"
PIDFILE=/usr/local/freeswitch/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME

FS_USER=www-data #freeswitch
FS_GROUP=www-data #daemon

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions

#
# Function that sets ulimit values for the daemon
#
do_setlimits() {
        ulimit -c unlimited
        ulimit -d unlimited
        ulimit -f unlimited
        ulimit -i unlimited
        ulimit -n 999999
        ulimit -q unlimited
        ulimit -u unlimited
        ulimit -v unlimited
        ulimit -x unlimited
        ulimit -s 240
        ulimit -l unlimited
        return 0
}

#
# Function that starts the daemon/service
#
do_start()
{
    # Set user to run as
        if [ $FS_USER ] ; then
      DAEMON_ARGS="`echo $DAEMON_ARGS` -u $FS_USER"
        fi
    # Set group to run as
        if [ $FS_GROUP ] ; then
          DAEMON_ARGS="`echo $DAEMON_ARGS` -g $FS_GROUP"
        fi

        # Return
        #   0 if daemon has been started
        #   1 if daemon was already running
        #   2 if daemon could not be started
        start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null -- \
                || return 1
        do_setlimits
        start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --background -- \
                $DAEMON_ARGS \
                || return 2
        # Add code here, if necessary, that waits for the process to be ready
        # to handle requests from services started subsequently which depend
        # on this one.  As a last resort, sleep for some time.
}

#
# Function that stops the daemon/service
#
do_stop()
{
        # Return
        #   0 if daemon has been stopped
        #   1 if daemon was already stopped
        #   2 if daemon could not be stopped
        #   other if a failure occurred
        start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
        RETVAL="$?"
        [ "$RETVAL" = 2 ] && return 2
        # Wait for children to finish too if this is a daemon that forks
        # and if the daemon is only ever run from this initscript.
        # If the above conditions are not satisfied then add some other code
        # that waits for the process to drop all resources that could be
        # needed by services started subsequently.  A last resort is to
        # sleep for some time.
        start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
        [ "$?" = 2 ] && return 2
        # Many daemons don't delete their pidfiles when they exit.
        rm -f $PIDFILE
        return "$RETVAL"
}

#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
        #
        # If the daemon can reload its configuration without
        # restarting (for example, when it is sent a SIGHUP),
        # then implement that here.
        #
        start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
        return 0
}

case "$1" in
  start)
        [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
        do_start
        case "$?" in
                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
        esac
        ;;
  stop)
        [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
        do_stop
        case "$?" in
                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
        esac
        ;;
  status)
       status_of_proc -p $PIDFILE $DAEMON $NAME && exit 0 || exit $?
       ;;
  #reload|force-reload)
        #
        # If do_reload() is not implemented then leave this commented out
        # and leave 'force-reload' as an alias for 'restart'.
        #
        #log_daemon_msg "Reloading $DESC" "$NAME"
        #do_reload
        #log_end_msg $?
        #;;
  restart|force-reload)
        #
        # If the "reload" option is implemented then remove the
        # 'force-reload' alias
        #
        log_daemon_msg "Restarting $DESC" "$NAME"
        do_stop
        case "$?" in
          0|1)
                do_start
                case "$?" in
                        0) log_end_msg 0 ;;
                        1) log_end_msg 1 ;; # Old process is still running
                        *) log_end_msg 1 ;; # Failed to start
                esac
                ;;
          *)
                # Failed to stop
                log_end_msg 1
                ;;
        esac
        ;;
  *)
        #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
        echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
        exit 3
        ;;
esac

exit 0

Make the script executable and make it auto start on system boot:

chmod +x /etc/init.d/freeswitch
update-rc.d freeswitch defaults