Difference between revisions of "Feature Codes"
From FusionPBX
(→Basic) |
(→Basic) |
||
Line 25: | Line 25: | ||
|- | |- | ||
| *5900 | | *5900 | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
| Valet Park | | Valet Park | ||
| Attended Transfer (park). The park extension will be played back to you. | | Attended Transfer (park). The park extension will be played back to you. | ||
|- | |- | ||
− | | * | + | | *5901-5999 |
| Valet Un-Park | | Valet Un-Park | ||
| Retrieve a Valet Parked call. | | Retrieve a Valet Parked call. |
Latest revision as of 00:12, 5 June 2015
Contents
Basic
Feature Code | Name | Detail |
---|---|---|
*1 | Call Transfer | Transfer a call to another extension |
*2 | Record Active Call | |
*4 | Attended Call Transfer | Attended call transfer to another extension. After extension number press # |
*411 | Directory | *DIR to dial by name. |
*3472 | DISA | *DISA followed by Administrative PIN to receive a dialtone and call out. |
*5900 | Valet Park | Attended Transfer (park). The park extension will be played back to you. |
*5901-5999 | Valet Un-Park | Retrieve a Valet Parked call. |
*67 <phone number> | Call Privacy | Activate call privacy |
*69 | Call Return | Call back the last incoming number |
*732 | Record | *REC followed by Administrative PIN to record a message. |
*8[ext] | Extension Intercom | Page a specific extension. |
*870 | Redial | Redial a number |
*xx | Talking Date | To Do |
*xx | Talking Time | To Do |
*xx | Talking Date & Time | To Do |
*925 | Wakeup Call | Schedule a wakeup call |
Voicemail
Feature Code | Name | Detail |
---|---|---|
*97 | Voicemail | The system detects the extension, and will prompt for your password |
*98 | Check any Voicemail box | The system will prompt for both your id (extension number) and password |
*4000 | Check any Voicemail box | The system will prompt for both your id (extension number) and password |
*99 <extension> | Send to Voicemail | Send a call directly to voicemail |
Conference
Feature Code | Name | Detail |
---|---|---|
*3001-3099 | Conference (8khz) | Conference rooms with 8khz (cellphone quality) audio |
*3101-3199 | Conference (16khz) | Conference rooms with 16khz audio |
*3201-3299 | Conference (32khz) | Conference room with 32khz audio |
*3301-3399 | Conference (48khz) | Conference room with 48khz (cd quality) audio |
Additional Conference numbers can be added via the GUI. |
Group
Feature Code | Name | Detail |
---|---|---|
*8 | Group Intercept | |
*80 <group ID> | Delete from Group | Remove extension from a group using 2 digit group ID. See Call Groups. |
**81 <group ID> | Add to Group | Add extension to a group using 2 digit group ID. See Call Groups. |
**82 <group ID> | Simultaneous Ring | Ring an entire group simultaneously (using a 2 digit group ID) |
**83 <group ID> | Sequential Ring | Ring an entire group sequentially (using a 2 digit group ID) |
**2001 | Ring Billing | Ring the Billing Group |
**2002 | Ring Support | Ring the Support Group |
Miscellaneous
Feature Code | Name | Detail |
---|---|---|
*9192 | Info | Sends information to the console |
*9193 | Video Record | Record Video |
*9194 | Video Playback | Playback Video |
*9195 | Delay Echo | Audio is played back after a slight delay |
*9196 | Echo Test | Echo Test |
*9197 | Milliwatt Tone | Tone Playback |
*9198 | Test Tone | Tone Playback |
*9664 | Test MoH | Test Music on Hold |
*5000 | Default Attendant | Call the default auto-attendant |
Advanced
Feature Code | Name | Detail |
---|---|---|
*8 <ext> | Intercom | Use Intercom on extension |
*33 <ext> (used to be *88 <ext> conflicted with page-extension *8 <ext> in some cases) | Eavesdrop | Listen to the call. Press 1 for remote, 2 for local, 3 for full conversation |
*886 | Global Intercept | Intercept a call that is ringing |
** <ext> | Intercept an extension | |
**8 <ext> | Intercept an extension |
Warning
Note: Feature Codes are defined in the default dial plan, however this is not updated when you update FusionPBX. Therefore if your original installation of FusionPBX was a while back you might not have access to all these feature codes. To update manually, you can pull the latest version from http://code.google.com/p/fusionpbx/source/browse/trunk/fusionpbx/includes/install/dialplan/default.xml
Adding extra feature codes
Setting up a call forwarding feature code [Talking Clock]