CentOS Install
From FusionPBX
Contents
Zaptel Install
If this system is to use cards inside the phone server than Zaptel needs to be installed.
Sangoma Wanpipe
This is a Sangoma specific driver it can be used or Zaptel can be used. http://wiki.sangoma.com/wanpipe-freeswitch-install
Install dependency packages
sudo yum install -y kernel-devel.x86_64 zaptel-devel.x86_64 sudo yum install lksctp-tools-devel sudo yum install flex libtermcap-devel bison
Get zaptel source
cd /usr/src svn checkout http://svn.digium.com/svn/zaptel/branches/1.4 zaptel
or
cd /usr/src/ wget http://downloads.asterisk.org/pub/telephony/zaptel/zaptel-1.4.12.1.tar.gz
Get wanpipe source
cd /usr/src/ wget ftp://ftp.sangoma.com/linux/current_wanpipe/wanpipe-latest.tgz tar xvfz wanpipe-latest.tgz cd /usr/src/wanpipe-*
Install wanpipe
bash -p Setup install
Would you like to install WANPIPE now? [y] (y/n) y Press [Enter] to continue... Please specify absolute path name of your linux headers/source directory
Press Enter for Default: /lib/modules/2.6.18-164.el5/build /usr/src/kernels/2.6.18-164.11.1.el5-x86_64/
Install modules for current image: 2.6.18-164.el5 ? (y/n) y
Press [Enter] to continue...
Please Select Compilation Mode Please select (1-11) [Default: 1]:
10. TDM API
Protocols: TDM API on AFT adapters:
Default for: FreeSwitch, Yate, Sunrise
Custom voice development
Please select (1-11) [Default: 1]: 10 Please select a protocol option in [<opt>]: ALL (for all) Please select working zaptel directory [1-1][m]: m Please enter zaptel dir: [Default: /usr/src/zaptel] 1. > /usr/src/zaptel
Checking for UDEV Zaptel compatibility...
Would you like to add UDEV rules for Zaptel devices ? (y/n) n
Press [Enter] to continue... Press [Enter] to continue...
[EXIT|Q|q]: Exit Protocol Selection
Please select a protocol option in [<opt>]: EXIT
Visually Confirm that driver compilation was successful! (y/n) y
WANPIPE v3.5.10 Installation Script
Copyright (c) 1995-2009, Sangoma Technologies Inc.
WANPIPE META CONFIGURATION
There are two configuration files associated with WANPIPE.
1) /usr/src/wanpipe-3.5.10/wanrouter.rc:
- defines locations of important files such as lock
and configuration files as well as start/stop
order of multiple WANPIPE devices.
2) /usr/src/wanpipe-3.5.10/wanpipe1.conf:
- main configuration file for each WANPIPE device.
- defines interfaces, hardware and protocol information.
- this file can be created using the 'wancfg' GUI
utility or manually based on sample files located
in /etc/wanpipe/samples.
Please read the WanpipeInstallation.(pdf/txt) manual for further information.
Press [Enter] to continue...
Please specify a desired location for WANPIPE configuration files.
(Press Enter for Default: /etc/wanpipe)
<specify path:> /etc/wanpipe
Please specify a desired location for WANPIPE interface files.
(Press Enter for Default: /etc/wanpipe/interfaces)
<specify path:> /etc/wanpipe/interfaces
Please specify a location for WANPIPE binary, firmware files.
(Press Enter for Default: /etc/wanpipe/firmware)
<specify path:> /etc/wanpipe/firmware
WANPIPE v3.5.10 Installation Script
Copyright (c) 1995-2009, Sangoma Technologies Inc.
WANPIPE UTILITIES SETUP
WANPIPE utilities are used to:
1) create configuration files: for Zaptel and Asterisk
/usr/sbin/wancfg_zaptel #Zaptel and Asterisk
/usr/sbin/wancfg_dahdi #Dahdi and Asterisk
/usr/sbin/wancfg_smg #BRI/SS7, Zaptel and Asterisk
/usr/sbin/wancfg_tdmapi #TDM API
2) create WANPIPE WAN/IP configuration files.
(/usr/sbin/wancfg)
3) start,stop,restart individual/all devices and interfaces.
(/usr/sbin/wanrouter)
4) debug line, protocol and driver problems.
(/usr/sbin/wanpipemon)
5) aid in WANPIPE API development
(/etc/wanpipe/api)
Refer to the WanpipeInstallation.(pdf/txt) for more information. Press [Enter] to continue... Press [Enter] to continue... Installing WANPIPE Files ... ! Installing WANPIPE Utilities in /usr/sbin Installing wanrouter.rc in /etc/wanpipe Installing wanpipe libraries in /etc/wanpipe Installing firmware in /etc/wanpipe/firmware Installing documentation in /usr/share/doc/wanpipe Installing sample api code in /etc/wanpipe/api Installing AFT Firmware update utility in /etc/wanpipe/util Installing driver headers in /etc/wanpipe/api/include/linux Installing Hardware Echo Cancel Utilites Press [Enter] to continue... Would you like to install WANPIPE start-up scripts? (y/n) y WANPIPE v3.5.10 Installation Script Copyright (c) 1995-2009, Sangoma Technologies Inc. WANPIPE INSTALLATON: COMPLETE
WANPIPE installation is now complete. WANPIPE kernel drivers and configuration/debug utilities have been compiled and installed.
1) Proceed to configure the WANPIPE drivers:
Asterisk/Zaptel : /usr/sbin/wancfg_zaptel
Asterisk/Dahdi : /usr/sbin/wancfg_dahdi
TDM API : /usr/sbin/wancfg_tdmapi
SMG SS7/BRI/PRI : /usr/sbin/wancfg_smg
WAN Routing/API : /usr/sbin/wancfg
2) Use the /usr/sbin/wanrouter startup script to start and stop
the router. (eg: wanrouter start)
3) To uninstall WANPIPE package run ./Setup remove
Please read http://wiki.sangoma.com for further instructions.
Sometimes you need an
depmod -a
GIT Install
cd /usr/local/src yum -y install gcc gcc-c++ make gettext-devel expat-devel curl-devel zlib-devel openssl-devel bzip2 wget http://kernel.org/pub/software/scm/git/git-1.7.4.tar.bz2 tar -xvjf git-1.7.4.tar.bz2 cd git-1.7.4 make prefix=/usr/local all make prefix=/usr/local install
FreeSWITCH Install
Install the following dependencies
yum install subversion autoconf automake libtool gcc-c++ ncurses-devel make expat-devel zlib zlib-devel
The following will enable additional modules
yum install nano unixODBC-devel openssl-devel gnutls-devel libogg-devel libvorbis-devel curl-devel
Then use the following
cd /usr/src/ git clone git://git.freeswitch.org/freeswitch.git cd /usr/src/freeswitch ./bootstrap.sh ./configure make install make cd-sounds-install make cd-moh-install
+---------- FreeSWITCH install Complete ----------+ + FreeSWITCH has been successfully installed. + + + + Install sounds: + + (uhd-sounds includes hd-sounds, sounds) + + (hd-sounds includes sounds) + + ------------------------------------ + + make cd-sounds-install + + make cd-moh-install + + + + make uhd-sounds-install + + make uhd-moh-install + + + + make hd-sounds-install + + make hd-moh-install + + + + make sounds-install + + make moh-install + + + + Install non english sounds: + + replace XX with language + + (ru : Russian) + + ------------------------------------ + + make cd-sounds-XX-install + + make uhd-sounds-XX-install + + make hd-sounds-XX-install + + make sounds-XX-install + + + + Upgrade to latest: + + ---------------------------------- + + make current + + + + Rebuild all: + + ---------------------------------- + + make sure + + + + Install/Re-install default config: + + ---------------------------------- + + make samples + + + + + + Additional resources: + + ---------------------------------- + + http://www.freeswitch.org + + http://wiki.freeswitch.org + + http://jira.freeswitch.org + + http://lists.freeswitch.org + + + + irc.freenode.net / #freeswitch + + + +-------------------------------------------------+
To enable a few extra features you may want to go ahead and edit modules.conf. Remove the # in front of the lines with these modules:
mod_spandsp mod_shout mod_flite mod_pocketshpinx
After saving the changes you may want to go ahead and get your "git together":
cd freeswitch git pull make current
After this you have the latest FreeSWITCH ready for use with FusionPBX
FreeSWITCH Auto Start
Copy the sample-init-file to /etc/init.d/
cp build/freeswitch.init.redhat /etc/init.d/freeswitch
Open /etc/init.d/freeswitch and change the freeswitch-directory from /opt/freeswitch to /usr/local/freeswitch
nano /etc/init.d/freeswich
PID_FILE=${PID_FILE-/usr/local/freeswitch/run/freeswitch.pid}
FS_FILE=${FS_FILE-/usr/local/freeswitch/bin/freeswitch}
FS_HOME=${FS_HOME-/usr/local/freeswitch}
Set the permissions and add it to run on startup
chmod 755 /etc/init.d/freeswitch chkconfig --add freeswitch chkconfig --level 5 freeswitch on chkconfig --list freeswitch
CentoOS 32-bit Install
* Take a look at, installing FusionPBX on CentOS in 4 Steps.
CentoOS 64-bit Install
If you don't have 64-bit support, just remove x86_64 from the below packages.
Additional Tools
On CentOS w/ 64-bit support: CentOS does not yet ship a recent enough version of PHP, so we suggest you use the RPMs provided in the REMI repository. To do so:
wget http://download.fedora.redhat.com/pub/epel/5/i386/epel-release-5-4.noarch.rpm wget http://rpms.famillecollet.com/enterprise/remi-release-5.rpm rpm -Uvh epel-release-5-4.noarch.rpm rpm -Uvh remi-release-5.rpm
yum install zaptel.x86_64 zaptel-lib.x86_64 zaptel-utils.x86_64 libpri.x86_64 spandsp.x86_64
PostgreSQL
rpm -Uvh remi-release-5*.rpm epel-release-5*.rpm yum --enablerepo=remi install php php-common php-pgsql php-pdo php-soap php-xml php-xmlrpc yum --enablerepo=remi upgrade php php-common php-pdo
MySQL
Before installing the remi packages, it is suggested that you install the dependent libraries. The upstream packages does not have the correct version and conflict with each other. To do so:
wget http://downloads.mysql.com/archives/mysql-5.1/MySQL-shared-compat-5.1.30-0.rhel5.x86_64.rpm rpm -Uvh MySQL-shared-compat-5.1.30-0.rhel5.x86_64.rpm
If you get a conflict, force it.
rpm -Uvh MySQL-shared-compat-5.1.30-0.rhel5.x86_64.rpm --force
Now that you have all the version of mysql client libraries; things just install cleanly.
rpm -Uvh remi-release-5*.rpm epel-release-5*.rpm yum --enablerepo=remi install php php-common php-mysql php-pdo php-soap php-xml php-xmlrpc yum --enablerepo=remi upgrade php php-common php-pdo
Permissions
Set permissions
adduser freeswitch chown -R freeswitch:freeswitch /usr/local/freeswitch chown -R apache:apache /var/www/fusionpbx chmod 766 -R /var/www/fusionpbx
Add the apache user to the freeswitch group
nano /etc/group
Before:
freeswitch:x:500
After:
freeswitch:x:500:freeswitch,apache
Fusionpbx
Dependencies Subversion
yum install subversion
Apache
yum install apache2
PHP >= 5.2.3
yum install php5 php5-pdo php-sqlite php5-pdo_sqlite
Install the backend of your choice
sqlite
yum install sqlite3 php5-pdo_sqlite
mysql
yum install mysql-server.x86_64 mysql.x86_64 mysql-server-devel.x86_64 php5-pdo_mysql
postgresql
yum install php5-pdo_pgsql postgresql-server.x86_64 postgresql.x86_64
FusionPBX install
Download FusionPBX source and add it to Apache
cd /var/www sudo svn checkout http://fusionpbx.googlecode.com/svn/trunk/fusionpbx /var/www/fusionpbx
Network Time Protocol
If NTP is not installed then install it.
yum install ntp chkconfig ntpd on ntpdate pool.ntp.org service ntpd start
If NTP is running then do the following:
service ntpd stop ntpdate pool.ntp.org service ntpd start
Additional Notes
How to start stop FreeSWITCH
/usr/local/freeswitch/bin/freeswitch -stop /usr/local/freeswitch/bin/freeswitch -nc
How to start, stop and restart Apache
service httpd start service httpd stop service httpd restart
Change the CentOS root password
su root passwd
