Installing FusionPBX behind pfSense

From FusionPBX
Revision as of 20:59, 1 April 2014 by Esamuels (talk | contribs)
Jump to: navigation, search

First we need to config pfSense to open the necessary ports for FusionPBX and Freeswitch

In pfSense navigate to Firewall >> Aliases and click on the Ports TAB.

Name: PBX/n Description: FusionPBX Type: Ports

Then proceed to add the ports as follows:

Port Description 80 HTTP 443 HTTPS 5060:5061 SIP Internal 5080:5081 SIP External 16384:32768 RTP

After you are finished Click SAVE


Configure Port Forwarding

Click on the '+' to add a new Entry

Firewall: NAT: Port Forward: Edit

Interface: WAN Protocol: TCP/UDP Destination: <<Select a Public IP from the List>> Destination Port Range:

                      from: (Other) PBX
                      to:   (Other) PBX

Redirect target IP: 10.10.0.10 Redirect target port: (Other) PBX

Description: FusionPBX NAT reflection: Use system default

Click SAVE when done.