Difference between revisions of "Outbound Routes"
From FusionPBX
m |
|||
Line 16: | Line 16: | ||
'''Description:''' Enter a description for the outbound route. | '''Description:''' Enter a description for the outbound route. | ||
− | + | == Pin Number == | |
+ | Before the bridge add the following actions | ||
+ | |||
+ | action set pin_number=(Whatever pin number you choose) | ||
+ | |||
+ | action lua pin_number.lua | ||
+ | |||
+ | Also make sure pin_numbr.lua is in /usr/local/freeswitch/scripts/ (by default it is) |
Revision as of 15:22, 19 April 2012
Menu: (Dialplan-Outbound Routes)
Allows you to easily create outbound routes through a gateway. When a call matches the conditions the call is then routed to that gateway.
The routes added here are also displayed/managed from Dialplan_Manager.
This is just a logical grouping for easy management of Outbound Routes to Gateways.
ADD Outbound Routes
Gateway: Select the gateway to use with this outbound route. Dialplan Expression: dialplan data, which is autofilled if you use the drop-down list in the bottom drop-down list: Shortcut to the Dialplan Manager to create the outbound dialplan entries for this Gateway. Order: Select the order number. The order number determines the order of the outbound routes when there is more than one. Enabled: Choose to enable or disable the outbound route. Description: Enter a description for the outbound route.
Pin Number
Before the bridge add the following actions
action set pin_number=(Whatever pin number you choose)
action lua pin_number.lua
Also make sure pin_numbr.lua is in /usr/local/freeswitch/scripts/ (by default it is)