Difference between revisions of "Talk:Raspberry Pi Script"
(Script misconfigures www.conf wrong, causing 502 bad gateway error) |
(→Script Failure on Raspbian: new section) |
||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 3: | Line 3: | ||
Using the Google a bit, it turns out this is an issue when php-fpm and nginx try to talk with each other on different channels. | Using the Google a bit, it turns out this is an issue when php-fpm and nginx try to talk with each other on different channels. | ||
| − | The script configures www.conf with a line like: | + | The script configures /etc/php5/fpm/pool.d/www.conf with a line like: |
listen = /var/run/php5-fpm.sock | listen = /var/run/php5-fpm.sock | ||
| Line 11: | Line 11: | ||
listen = 127.0.0.1:9000 | listen = 127.0.0.1:9000 | ||
| − | so that configuration file has to be modified and then php-fpm needs to be restarted | + | so that configuration file has to be modified and then php-fpm needs to be restarted: |
| + | |||
| + | /etc/init.d/php5-fpm stop && sleep 10 && /etc/init.d/php5-fpm start | ||
| + | |||
| + | after that, the configuration page shows up as expected. | ||
I'm running this on a BeagleBone Black, not on a RaspberryPi, but that shouldn't make the difference ;) | I'm running this on a BeagleBone Black, not on a RaspberryPi, but that shouldn't make the difference ;) | ||
| + | =================================================================================================================== | ||
| + | Script failing for me using a clean build of Raspbian with updates and upgrade applied an a multi-core Pi. | ||
| + | |||
| + | "Compiling FreeSWITCH. This might take a while [~30 minutes]... multicore processor detected. Compiling with -j 4 | ||
| + | make: *** No rule to make target 'core'. Stop. | ||
| + | Command exited with non-zero status 2 | ||
| + | 0.01user 0.00system 0:00.02elapsed 50%CPU (0avgtext+0avgdata 1972maxresident)k | ||
| + | 0inputs+0outputs (0major+130minor)pagefaults 0swaps | ||
| + | make: *** No targets specified and no makefile found. Stop. | ||
| + | Command exited with non-zero status 2 | ||
| + | 0.01user 0.00system 0:00.01elapsed 90%CPU (0avgtext+0avgdata 1972maxresident)k | ||
| + | 0inputs+0outputs (0major+130minor)pagefaults 0swaps | ||
| + | ERROR: FreeSWITCH Build Failure. | ||
| + | " | ||
| + | |||
| + | == Script Failure on Raspbian == | ||
| + | |||
| + | I have tried this script on a Raspberry Pi Model 3+ with both Raspbian Lite and Raspian Stretch with desktop. It turns out that there are missing prerequisites including autoconf, libtool, libtool-bin, libpq-dev, libjpeg-dev and sqlite3.pc. With that said, there was still an error at the end which stated: Checking for sqlite3 >= 3.6.20... Package sqlite3 was not found in the pkg-config search patch. Perhaps you should add the directory containing 'sqlite3.pc' to the PKG_CONFIG_PATH environmental variable. - --[[User:KitchM|KitchM]] ([[User talk:KitchM|talk]]) 19:54, 18 March 2019 (UTC) | ||
Latest revision as of 19:54, 18 March 2019
The script seems to have a bug, from what I can tell. The symptom is, that at the very end of the script, when one's prompted to finish from the web browser, one gets an "502 bad gateway error" page served up by nginx instead of the expected configuration page.
Using the Google a bit, it turns out this is an issue when php-fpm and nginx try to talk with each other on different channels.
The script configures /etc/php5/fpm/pool.d/www.conf with a line like:
listen = /var/run/php5-fpm.sock
but it should be
listen = 127.0.0.1:9000
so that configuration file has to be modified and then php-fpm needs to be restarted:
/etc/init.d/php5-fpm stop && sleep 10 && /etc/init.d/php5-fpm start
after that, the configuration page shows up as expected.
I'm running this on a BeagleBone Black, not on a RaspberryPi, but that shouldn't make the difference ;)
=======================================================================================================
Script failing for me using a clean build of Raspbian with updates and upgrade applied an a multi-core Pi.
"Compiling FreeSWITCH. This might take a while [~30 minutes]... multicore processor detected. Compiling with -j 4 make: *** No rule to make target 'core'. Stop. Command exited with non-zero status 2 0.01user 0.00system 0:00.02elapsed 50%CPU (0avgtext+0avgdata 1972maxresident)k 0inputs+0outputs (0major+130minor)pagefaults 0swaps make: *** No targets specified and no makefile found. Stop. Command exited with non-zero status 2 0.01user 0.00system 0:00.01elapsed 90%CPU (0avgtext+0avgdata 1972maxresident)k 0inputs+0outputs (0major+130minor)pagefaults 0swaps ERROR: FreeSWITCH Build Failure. "
Script Failure on Raspbian
I have tried this script on a Raspberry Pi Model 3+ with both Raspbian Lite and Raspian Stretch with desktop. It turns out that there are missing prerequisites including autoconf, libtool, libtool-bin, libpq-dev, libjpeg-dev and sqlite3.pc. With that said, there was still an error at the end which stated: Checking for sqlite3 >= 3.6.20... Package sqlite3 was not found in the pkg-config search patch. Perhaps you should add the directory containing 'sqlite3.pc' to the PKG_CONFIG_PATH environmental variable. - --KitchM (talk) 19:54, 18 March 2019 (UTC)
