Revision as of 20:53, 26 August 2014

Overview

This is an easy install even for newbies. Stick to the steps and everything should go just fine. With Debian netinstall as a base you will create your FusionPBX appliance.

This will use freeswitch and fusionpbx deb repos.
So it is a package install.

It will install nginx, Sqlite(Default)/Postgresql(Optional), monit, fail2ban.

If you have already some LAMP or similar install it can break it. (Please use Base Debian Only)

So we recommend it only on a fresh debian base netinstall!

The script is under the MIT License.
Mantainer and Copyright (c) <2013> r<dot>neese<at>gmail<dot>com

Well, lets get started!

Install Debian Wheezy

Download and install a minimal Debian wheezy

Get it here: http://www.debian.org/distrib/netinst Or use http://unetbootin.sourceforge.net/ to create your installation thumb stick. (Win/Linux) All other packages will be added later.

Attention OpenVZ users!!!

echo "Those of you running this script on openvz. You must run it as root and "
echo "bash  Fusionpbx-Debian-Pkg-Install-New.sh or it fails the networking check."
echo "Please take the time to refer to this document if you have install issues on openvz"
echo "http://openvz.org/Virtual_Ethernet_device and make sure to setup a eth0 ."

Install Script

After installing Debian... Login as root and download the install script to root home directory.

You will edit and run the script only once.

wget http://fusionpbx.googlecode.com/svn/trunk/scripts/install/Debian/Fusionpbx-Minimal-Install.sh

Read the full header/licencing:
Change the following settings as needed :

vi or nano Fusionpbx-Minimal-Install.sh

<------Start Edit HERE--------->

Network Interface selection
Default = eth0

net_iface=eth0

Use for configuring a odroid

odroid_boards="n"

Required
Stable/release=1.4/master=1.5 aka git head
Default is stable (currently there is only one working repo for freeswitch)

freeswitch_repo="stable"

Fusionpbx repo (release = 3.6.0 / devel = 3.5)

fusionpbx_repo="release"

To start FreeSWITCH with -nonat option set freeswitch_NAT to y
Set to y if on public static IP

freeswitch_nat=n

Set how long to keep freeswitch/fusionpbx log files 1 to 30 days (Default:5)

keep_logs=5

Dahdi & freetdm (Under Development in pkgs)(Not Yet Useable)

freeswitch_freetdm="n"

------Postgresql start-------
Optional (Not Required)
Please Select Server or Client not both.
Used for connecting to remote postgresql database servers
Install postgresql Client 9.3 for connection to remote postgresql servers (y/n)

postgresql_client="n"

Install postgresql server 9.3 (y/n) (client included)(Local Machine)
Notice:
You should not use postgresql server on a nand/emmc/sd. It cuts the performance
life in half due to all the needed reads and writes. This cuts the life of
your pbx emmc/sd in half.

postgresql_server="n"

Set Postgresql Server Admin username
Lower case only

pgsql_admin=pgsqladmin

Set Postgresql Server Admin password

pgsql_admin_passwd=pgsqladmin2014

Set Database Name used for fusionpbx in the postgresql server
(Default: fusionpbx)

db_name=fusionpbx

Set FusionPBX database admin name.(used by fusionpbx to access
the database table in the postgresql server.
(Default: fusionpbx)

db_user_name=fusionpbx

Set FusionPBX database admin password .(used by fusionpbx to access
the database table in the postgresql server).
Please set a ver secure passwd

db_user_passwd=fusionpbx2014

-------Postgresql-End--------------

Extra Option's
Install openvpn scripts

install_openvpn="n"

--------Secure-Server-Root Lockdown-------------
This will lock down the root user to using keys to login to ssh. meaning no
root login to ssh with out a ssh key

secure_server="n"

Please paste the public key you wish to add to the permited keys file
for root access via ssh

ssh_key=

Install Ajenti (Ajenti is a python based web interface for system control...)

install_ajenti == "n"

#<------Stop Edit HERE--------->

Make the script executable

chmod +x Fusionpbx-Minimal-Install.sh

Run the install script as root or sudo -s

# ./Fusionpbx-Minimal-Install.sh

in OpenVZ

# bash Fusionpbx-Minimal-Install.sh

Lean back and enjoy!

First Run Menu

You see a nice PBX First Setup/Run Menu first time you log in!

 System Uptime:  07:49:11 up  1:04,  2 users,  load average: 0.24, 0.26, 0.31
 HostName/DomainName: pbx
 WAN IP: 10.0.0.200 (example ip)

	PBX Administration Setup Menu: 

----- Network Configuration -------

wan) Configure Wide Area Network (WAN) 

---------Setup Menu---------------

1) Set Root Password         
2) Configure Timezone & Time
3) install Optional Fusion Pkgs
4) Disable/Enable nat Freeswitch
5) Enable/Disable SSH Root
6) Add/remove SSH Keys for
   with out ssh key Root Access

--------Network Test Tools -------

 pt) Ping IP   tr)Traceroute IP

-------- VPN Configuration ------- (only displayed if the option was installed)

 vpn) Configure OpenVPN Connections

-----------------------------------
 upgrd) Upgrade pkgs
 rbt) Reboot System 
 pwr) Power Off System
 x) Logout
 
Choice:

Please Use pkgs option to add in extra functions to the gui before setting it up.

This is so they are setup when you login and setup the gui for the first time.

This option is also available from the admin menu.

After you finish in the setup menu ... Login to the gui and configure your user/password/database settings.

you will do the following

       Please open a web-browser to http://<xxx.xxx.x.xx>
       or the Doamin name asigned to the machine like http://"<myhostname>".

accept the key / continue...

On the First Configuration page of the web user interface "fusionpbx".

select db type: sqlite use default : pgsql use the pulldown and select pgsql...

Set a admin user name and password and continue

On the Second Configuration page of the web user interface "fusionpbx".

If you used sqite on page one then just continue.

Else

If you selected pgsql : You will need the info the install provided you .

use this info in this order to fill in the database info

db_name=fusionpbx

db_user_name=fusionpbx

db_user_passwd=fusionpbx2014

pgsql_admin=pgsqladmin (creae database username field)

pgsql_admin_passwd=pgsqladmin2014 (create user password field)

When you finish the first stage setup:

Reboot 1 more time and your system is good to go.. This will load all the changes to dialplan and modules that fusionpbx changes.

Admin Menu

More over you see a nice PBX Administration Menu next time you log in!

System Uptime:  15:48:38 up 7 days, 23:15,  1 user,  load average: 3.39, 2.96,      3.69
Your Current HostName/DomainName for the system is : pbx.mydomain.com
Your Current WAN/Primary Network Interface IP is : 000.000.000.000
To Access the web interface go to http://000.000.000.000

    PBX Administration Menu:

----- Network Configuration -------
 w) Configure Wide Area Network (WAN)
--------- Maintance ---------------
 1) Set Root Password         2) Configure Timezone & Time
 3) Web Service Options       4) Freeswitch CLI
 5) Restart Freeswitch        6) Clear & Rotate logs
 7) Backup PBX System         8) Restore From Backup
 9) Factory Reset System      10) Drop to Shell
 11) Disable/Enable nat       12) Enable/Disable SSH Root
     for FreeSwitch               with out ssh key
 13) Add/remove SSH Keys for
     Root Access

---------Postgresql--Database------ (Only Seen if you have pgsql client/server installed)
 db) Drop Database Table
 npg) Enable freeswitch native postgresql support (Under Devel)

--------Network Test Tools -------
 p) Ping IP   t)Traceroute IP

-----Extra Fusionpbx--pgs/modules-----
 pkgs) Install and enable extra fusionpbx apps/modues

---------Upgrade Options ----------
 upgrd) System Upgrade

---------Repo Settings------------
 repo) Select what repo to use
 fsrp) Enable/Disable Freeswitch repo
 furp) Enable/Disable Fusionpbx repo

-------- Extra-Options -----------
 rbt) Reboot System
 pwr) Power Off System
 x) Logout of terminal

Choice:

Set everything up as you need it.

Have fun with all the new features!

Before you start with FusionPBX

http://wiki.fusionpbx.com/index.php?title=Fail2Ban#Keep_yourself_from_getting_banned.

Notes

Alix alix6f2 or AMD-APU

Requirements:

You will need approx 1.4 GB for a minimal install

voyage is debian distro fo embedded platforms. http://linux.voyage.hk/
remeber the distro usually ro use remountrw or adapt the init script

Proxmox ve

Create CT
Choose your fauvorite Debian Template
Select bridge interface for your Network
then you will have eth0 as interface

http://pve.proxmox.com/wiki/Main_Page

Difference between revisions of "New appliance install"

Revision as of 20:53, 26 August 2014

Contents

Overview

Install Debian Wheezy

Attention OpenVZ users!!!

Install Script

First Run Menu

Admin Menu

Before you start with FusionPBX

Notes

Alix alix6f2 or AMD-APU

Proxmox ve

Navigation menu

Views

Personal tools

Navigation

Search

Tools