Difference between revisions of "CentOS Install"

From FusionPBX
Jump to: navigation, search
(→‎Additional Notes)
(→‎Repositories)
 
(132 intermediate revisions by 11 users not shown)
Line 1: Line 1:
 +
==Script Install==
 +
http://code.google.com/p/fusionpbx/source/browse/trunk/scripts/install/centos6/install_fusionpbx.sh
 +
 +
 +
 +
== '''CentOS 6.4 Installation Steps''' ==
 +
 +
 +
http://wiki.fusionpbx.com/index.php?title=Installing_FusionPBX_3.2_on_CentOS_6.4_and_Mysql
 +
 +
----
 +
 +
==Preface==
 +
The following instructions were written for CentOS 5.6. http://mirror.centos.org/centos/5/isos/ After installing CentOS follow the instructions below.
 +
 +
Instructions to install FusionPBX with CentOS 6.2 and PostgreSQL can be found at: http://wiki.fusionpbx.com/index.php/CentOS_6.2_with_PostgreSQL
 +
 +
[[http://wiki.fusionpbx.com/index.php/CentOS_6.2_with_PostgreSQL]]
 +
 +
==Dependencies==
 +
Install the following dependencies
 +
yum -y install subversion autoconf automake libtool gcc-c++ git-core ncurses-devel make expat-devel bison zlib zlib-devel ghostscript gettext-devel
 +
yum -y install nano unixODBC-devel openssl-devel gnutls-devel libogg-devel libvorbis-devel curl-devel libtiff-devel libjpeg-devel python-devel expat-devel zlib zlib-devel bzip2
 +
 +
==Repositories==
 +
 +
CentOS does not yet ship a recent enough version of PHP in order to use PHP FPM (fast cgi), so we suggest you use the RPMs provided in the Webtatic repository. Also, this allows GIT to be installed via YUM.
 +
To do so:
 +
 +
 +
Use this link for EPEL repository for 32 bit machines
 +
 +
rpm -Uvh http://dl.fedoraproject.org/pub/epel/5/i386/epel-release-5-4.noarch.rpm
 +
 +
Use this link for EPEL repository for 64 bit machines
 +
 +
rpm -Uvh http://dl.fedoraproject.org/pub/epel/5/x86_64/epel-release-5-4.noarch.rpm
 +
--[[User:PoolPro|PoolPro]] 23:35, 26 February 2012 (UTC)
  
 
==GIT Install==
 
==GIT Install==
−
cd /usr/local/src
+
Since we added the epel repo, GIT can be installed via YUM
−
yum -y install gcc gcc-c++ make gettext-devel expat-devel curl-devel zlib-devel openssl-devel bzip2
 
−
wget http://kernel.org/pub/software/scm/git/git-1.7.4.tar.bz2
 
−
tar -xvjf git-1.7.4.tar.bz2
 
−
cd git-1.7.4
 
−
make prefix=/usr/local all
 
−
make prefix=/usr/local install
 
  
−
==Dependencies Install==
+
  yum -y install git
−
Install the following dependencies
 
−
  yum install subversion autoconf automake libtool gcc-c++ git-core ncurses-devel make expat-devel zlib zlib-devel
 
−
yum install nano unixODBC-devel openssl-devel gnutls-devel libogg-devel libvorbis-devel curl-devel libtiff-devel libjpeg-devel python-devel expat-devel zlib zlib-devel bzip2
 
  
 
==FreeSWITCH Install==
 
==FreeSWITCH Install==
Line 19: Line 48:
  
 
  cd /usr/src/
 
  cd /usr/src/
−
  git clone git://git.freeswitch.org/freeswitch.git
+
  git clone -b v1.4 https://freeswitch.org/stash/scm/fs/freeswitch.git
 
  cd /usr/src/freeswitch
 
  cd /usr/src/freeswitch
 
  ./bootstrap.sh
 
  ./bootstrap.sh
  
 
Edit modules.conf to enable or disable desired modules. To enable a few extra features you may want to go ahead and edit modules.conf. Remove the # in front of the lines with these modules:
 
Edit modules.conf to enable or disable desired modules. To enable a few extra features you may want to go ahead and edit modules.conf. Remove the # in front of the lines with these modules:
 +
mod_rtmp
 +
mod_directory
 +
mod_callcenter
 +
mod_tts_commandline
 +
mod_dingaling
 +
mod_flite
 +
mod_shout
 +
mod_pocketsphinx
 +
mod_cidlookup
  
−
mod_spandsp
 
−
mod_shout
 
−
mod_flite
 
−
mod_pocketshpinx
 
  
 
Complete the FreeSWITCH compile.
 
Complete the FreeSWITCH compile.
Line 34: Line 68:
 
  ./configure
 
  ./configure
 
  make install
 
  make install
 +
make samples
 +
 +
8 kHz Standard Audio
 +
make sounds-install
 +
make moh-install
 +
 +
16 kHz High Definition Audio
 +
make hd-moh-install
 +
make hd-sounds-install
 +
 +
32 kHz Ultra High Definition Audio
 +
make uhd-moh-install
 +
make uhd-sounds-install
 +
 +
48 kHz CD Quality Audio
 
  make cd-sounds-install
 
  make cd-sounds-install
 
  make cd-moh-install
 
  make cd-moh-install
−
make hd-moh-install
+
 
−
make hd-sounds-install
 
  
 
  +---------- FreeSWITCH install Complete ----------+
 
  +---------- FreeSWITCH install Complete ----------+
Line 96: Line 144:
 
  cd /usr/src/freeswitch
 
  cd /usr/src/freeswitch
 
  make current
 
  make current
−
 
−
After this you have the latest FreeSWITCH ready for use with FusionPBX
 
  
 
==FreeSWITCH Auto Start==
 
==FreeSWITCH Auto Start==
Line 105: Line 151:
 
   cp build/freeswitch.init.redhat /etc/init.d/freeswitch
 
   cp build/freeswitch.init.redhat /etc/init.d/freeswitch
  
−
Open /etc/init.d/freeswitch and change the freeswitch-directory from /opt/freeswitch to /usr/local/freeswitch
+
Replace /opt/freeswitch with /usr/local/freeswitch in the /etc/init.d/freeswitch
−
 
 
−
  nano /etc/init.d/freeswich
 
−
  ''PID_FILE=${PID_FILE-'''/usr/local/'''freeswitch/run/freeswitch.pid}
 
−
  ''FS_FILE=${FS_FILE-'''/usr/local/'''freeswitch/bin/freeswitch}''
 
−
  ''FS_HOME=${FS_HOME-'''/usr/local/'''freeswitch}''
 
−
 
 
  
 +
sed -i 's/\/opt\/freeswitch/\/usr\/local\/freeswitch/g' /etc/init.d/freeswitch
  
 
Set the permissions and add it to run on startup
 
Set the permissions and add it to run on startup
  
 
  chmod 765 /etc/init.d/freeswitch
 
  chmod 765 /etc/init.d/freeswitch
−
  chkconfig --add freeswitch
+
  /sbin/chkconfig --add freeswitch
−
  chkconfig --level 5 freeswitch on
+
  /sbin/chkconfig --level 5 freeswitch on
−
  chkconfig --list freeswitch
+
  /sbin/chkconfig --list freeswitch
 +
 
 +
==FreeSWITCH conf==
 +
 
 +
Disable the following files but leave them for examples
  
−
==CentoOS 32-bit Install==
+
cd /usr/local/freeswitch/conf/dialplan/default
 +
mv 00_ladspa.xml 00_ladspa.noload
 +
mv 00_pizza_demo.xml 00_pizza_demo.noload
 +
mv 01_Talking_Clock.xml 01_Talking_Clock.noload
  
−
    * Take a look at, installing FusionPBX on CentOS in 4 Steps.
 
  
−
==CentoOS 64-bit Install==
+
==SELinux==
  
−
If you don't have 64-bit support, just remove x86_64 from the below packages.
+
Can create problems for file access and running services. The following link describes how to disable SELinux.
  
−
==Additional Tools==
+
http://www.crypt.gen.nz/selinux/disable_selinux.html
  
−
On CentOS w/ 64-bit support: CentOS does not yet ship a recent enough version of PHP, so we suggest you use the RPMs provided in the REMI repository. To do so:
+
==Database==
  
−
wget http://download.fedora.redhat.com/pub/epel/5/i386/epel-release-5-4.noarch.rpm
+
===SQLite===
−
wget http://rpms.famillecollet.com/enterprise/remi-release-5.rpm
 
−
rpm -Uvh epel-release-5-4.noarch.rpm
 
−
rpm -Uvh remi-release-5.rpm
 
  
 +
Is installed with PHP
  
−
PostgreSQL
+
===PostgreSQL===
  
−
rpm -Uvh remi-release-5*.rpm epel-release-5*.rpm 
+
Postgres 8.4 or higher is required. The following instructions install version 9.0
−
yum --enablerepo=remi install php php-common php-pgsql php-pdo php-soap php-xml php-xmlrpc
+
Replace the custom-username and custom-password with the account information.
−
yum --enablerepo=remi upgrade php php-common php-pdo
 
  
 +
http://wiki.postgresql.org/wiki/YUM_Installation (additional information)
  
−
MySQL
+
Locate and edit your distributions .repo file, located: [base] and [updates] sections
 +
nano /etc/yum.repos.d/CentOS-Base.repo
  
−
Before installing the remi packages, it is suggested that you install the dependent libraries. The upstream packages does not have the correct version and conflict with each other. To do so:
+
To the section(s) identified above, you need to append a line:
 +
exclude=postgresql*
  
−
  wget http://downloads.mysql.com/archives/mysql-5.1/MySQL-shared-compat-5.1.30-0.rhel5.x86_64.rpm
+
Download and install PGDG RPM file
−
  rpm -Uvh MySQL-shared-compat-5.1.30-0.rhel5.x86_64.rpm
+
  wget http://yum.postgresql.org/9.0/redhat/rhel-5-i386/pgdg-centos90-9.0-5.noarch.rpm
 +
rpm -ivh pgdg-centos-9.0-5.noarch.rpm
 +
  yum install postgresql90-server
 +
service postgresql-9.0 initdb
 +
/sbin/chkconfig postgresql-9.0 on
 +
service postgresql-9.0 start
 +
su postgres
 +
psql
 +
CREATE ROLE custom-username WITH SUPERUSER LOGIN PASSWORD 'custom-password';
 +
\q
 +
exit
 +
sed -i 's/ident/md5/g' /var/lib/pgsql/9.0/data/pg_hba.conf
 +
service postgresql-9.0 restart
  
−
If you get a conflict, force it.
+
===MySQL===
  
−
  rpm -Uvh MySQL-shared-compat-5.1.30-0.rhel5.x86_64.rpm --force
+
Check to see if MySQL is installed
 +
  yum --enablerepo=webtatic list mysql55 mysql55-server
 +
 +
If it is installed then update it to a newer version
  
−
Now that you have all the version of mysql client libraries; things just install cleanly.
+
yum --enablerepo=webtatic upgrade mysql55 mysql55-server
  
−
rpm -Uvh remi-release-5*.rpm epel-release-5*.rpm  yum --enablerepo=remi install php php-common php-mysql php-pdo php-soap php-xml php-xmlrpc
+
If it is not installed then add it
−
yum --enablerepo=remi upgrade php php-common php-pdo
 
  
−
==Permissions==
+
yum –-enablerepo=webtatic install mysql55 mysql55-server
 +
/sbin/chkconfig mysqld on
 +
service mysqld start
  
−
Set permissions
+
Set the root password
 +
mysqladmin -u root password new_password_here
 +
mysqladmin -h 127.0.0.1 -u root password new_password_here
  
−
adduser freeswitch
+
==PHP==
−
chown -R freeswitch:freeswitch /usr/local/freeswitch
 
−
chown -R apache:apache /var/www/fusionpbx
 
−
chmod 766 -R /var/www/fusionpbx
 
  
−
Add the apache user to the freeswitch group
+
yum --enablerepo=webtatic install php php-common php-pdo php-soap php-xml php-xmlrpc
 +
yum --enablerepo=webtatic upgrade php php-common php-pdo
  
−
nano /etc/group
+
For PostgreSQL add
  
−
Before:
+
yum --enablerepo=webtatic install php-pgsql
  
−
freeswitch:x:500
+
For MySQL then add
  
−
After:
+
yum --enablerepo=webtatic install php-mysql mysql-connector-odbc
  
−
  freeswitch:x:500:freeswitch,apache
+
Install PHP Fast CGI
 +
  yum --enablerepo=webtatic install php-fpm
 +
/sbin/chkconfig php-fpm on
  
−
==Fusionpbx==
+
==Web Server==
  
−
Dependencies Subversion
+
There are multiple choices for a web server to use. These instructions focus on nginx because it takes very little server resources and scales well.
  
−
  yum install subversion
+
NGINX (pronounced: engine x)
 +
  yum --enablerepo=webtatic install nginx
 +
/sbin/chkconfig nginx on
  
−
Apache
+
Add the following directories.
  
−
yum install apache2
+
mkdir /etc/nginx/sites-available
 +
mkdir /etc/nginx/sites-enabled
  
−
PHP >= 5.2.3
+
Remove the original config and add a more flexible one. Don't try to paste these in all at once because the "rm"  and the wgets will make you miss something following.
  
−
  yum install php5 php5-pdo php-sqlite php5-pdo_sqlite
+
  cd /etc/nginx
 +
rm nginx.conf
 +
wget http://www.fusionpbx.com/downloads/centos/nginx/nginx.conf
 +
cd /etc/nginx/sites-available
 +
wget http://www.fusionpbx.com/downloads/centos/nginx/fusionpbx.conf
 +
ln /etc/nginx/sites-available/fusionpbx.conf /etc/nginx/sites-enabled/fusionpbx.conf
  
−
Install the backend of your choice
+
==OpenSSL==
  
−
sqlite
+
Make sure the /etc/ssl directory exists
 +
mkdir -p /etc/ssl
 +
Change the directory
 +
cd /etc/ssl
 +
Generate a private key:
 +
openssl genrsa -des3 -passout pass:fusionpbx_cert_password -out fusionpbx.ssl.key 1024
 +
Remove password from private key:
 +
openssl rsa -in fusionpbx.ssl.key -passin pass:fusionpbx_cert_password -out fusionpbx.ssl.key.nopass
 +
Create a CSR (certificate signing request):
 +
openssl req -new -key fusionpbx.ssl.key.nopass -out fusionpbx.ssl.csr -subj "/CN=fusionpbx/OU=Project/O=FusionPBX/L=Boise/C=US"
 +
Generate self-signed cert:
 +
openssl x509 -req -days 3650 -in fusionpbx.ssl.csr -signkey fusionpbx.ssl.key.nopass -out fusionpbx.ssl.crt
  
−
yum install sqlite3 php5-pdo_sqlite
+
==FusionPBX==
  
−
mysql
+
Download FusionPBX source and add it to the web server directory.
  
−
  yum install mysql-server.x86_64 mysql.x86_64 mysql-server-devel.x86_64 php5-pdo_mysql
+
  cd /var/www
 +
  svn checkout http://fusionpbx.googlecode.com/svn/trunk/fusionpbx /var/www/fusionpbx
  
−
postgresql
+
If you get an error: 'svn: command not found.' Then add subversion. Then run the svn checkout again.
  
−
  yum install php5-pdo_pgsql postgresql-server.x86_64 postgresql.x86_64
+
  yum install subversion
  
−
FusionPBX install
+
==Permissions==
 +
There are multiple ways to handle permissions. FreeSWITCH creates some file on demand such as voicemail and does not give the necessary group permissions because of that the following method is currently recommended. This method adds the www-data user, changes ownership of the files to use www-data and then make the php-fpm and freeswitch services run as www-data.
  
−
Download FusionPBX source and add it to Apache
+
/usr/sbin/adduser www-data
 +
chown -R www-data:www-data /usr/local/freeswitch
 +
chown -R www-data:www-data /var/www/fusionpbx
 +
sed -i 's/user = apache/user = www-data/g' /etc/php-fpm.d/www.conf
 +
sed -i 's/group = apache/group = www-data/g' /etc/php-fpm.d/www.conf
 +
sed -i 's/${FS_USER-freeswitch}/${FS_USER-www-data}/g' /etc/init.d/freeswitch
 +
chown -R www-data:www-data -R /var/lib/php/session
  
−
cd /var/www
 
−
sudo svn checkout http://fusionpbx.googlecode.com/svn/trunk/fusionpbx /var/www/fusionpbx
 
  
−
===Network Time Protocol===
+
==Network Time Protocol==
  
 
If NTP is not installed then install it.
 
If NTP is not installed then install it.
Line 232: Line 322:
 
  ntpdate pool.ntp.org
 
  ntpdate pool.ntp.org
 
  service ntpd start
 
  service ntpd start
 +
 +
==Fail2ban==
 +
 +
Brute force attacks are common. If the SIP and RTP ports are exposed to the Internet then it is important to install and configure Fail2ban.  Fail2ban can be configured to analyze the FreeSWITCH logs. When attacker are identified it blocks the offenders.
 +
 +
yum install fail2ban
 +
cd /etc/init.d
 +
/sbin/chkconfig fail2ban on
 +
 +
The configurations directory is
 +
/etc/fail2ban
 +
 +
For more info go to [[Fail2Ban]]
 +
 +
==Start the remaining services==
 +
 +
Start php-fpm (Without doing so will result in ERR 502 BAD GATEWAY)
 +
 +
service php-fpm start
 +
 +
Start FreeSWITCH
 +
service freeswitch start
 +
 +
Start nginx (Web Server)
 +
 +
service nginx start
 +
 +
==Browser==
 +
 +
To complete install go to the ip address or domain of the server in your web browser. You can use http or https and follow the instructions.
 +
 +
==Login==
 +
 +
After completing the install the default login information is whatever you set during setup
 +
after your initial connection to the web page.
 +
 +
Defaults used to be:
 +
 +
user: superadmin
 +
 +
pass: fusionpbx
 +
 +
System setup now makes you choose
  
 
==TDM notes==
 
==TDM notes==
  
−
Optional TDM card notes.
+
Optional TDM card notes. These notes have not been updated in a while.
 
[[CentOS Install TDM]]
 
[[CentOS Install TDM]]
  
 +
==Additional Notes==
  
−
==Additional Notes==
 
 
How to start stop FreeSWITCH
 
How to start stop FreeSWITCH
 +
service freeswitch start
 +
service freeswitch stop
  
−
/usr/local/freeswitch/bin/freeswitch -stop
+
How to start, stop and restart nginx (Web Server)
−
/usr/local/freeswitch/bin/freeswitch -nc
 
  
−
How to start, stop and restart Apache
+
  service nginx start
−
 
+
  service nginx stop
−
  service httpd start
+
  service nginx restart
−
  service httpd stop
 
−
  service httpd restart
 
  
 
Change the CentOS root password
 
Change the CentOS root password
Line 255: Line 387:
 
  su root
 
  su root
 
  passwd
 
  passwd
 +
 +
== '''Alternate method'''==
 +
You can follow next [https://okay.com.mx/en/entrepreneurs/install-fusionpbx-in-a-moment.html directions] to install the software using RPMS. It has been tested on Centos 6.6 and 7.

Latest revision as of 02:38, 22 April 2015

Script Install

http://code.google.com/p/fusionpbx/source/browse/trunk/scripts/install/centos6/install_fusionpbx.sh


CentOS 6.4 Installation Steps

http://wiki.fusionpbx.com/index.php?title=Installing_FusionPBX_3.2_on_CentOS_6.4_and_Mysql

Preface

The following instructions were written for CentOS 5.6. http://mirror.centos.org/centos/5/isos/ After installing CentOS follow the instructions below.

Instructions to install FusionPBX with CentOS 6.2 and PostgreSQL can be found at: http://wiki.fusionpbx.com/index.php/CentOS_6.2_with_PostgreSQL

[[1]]

Dependencies

Install the following dependencies 

yum -y install subversion autoconf automake libtool gcc-c++ git-core ncurses-devel make expat-devel bison zlib zlib-devel ghostscript gettext-devel
yum -y install nano unixODBC-devel openssl-devel gnutls-devel libogg-devel libvorbis-devel curl-devel libtiff-devel libjpeg-devel python-devel expat-devel zlib zlib-devel bzip2

Repositories

CentOS does not yet ship a recent enough version of PHP in order to use PHP FPM (fast cgi), so we suggest you use the RPMs provided in the Webtatic repository. Also, this allows GIT to be installed via YUM. To do so:


Use this link for EPEL repository for 32 bit machines 

rpm -Uvh http://dl.fedoraproject.org/pub/epel/5/i386/epel-release-5-4.noarch.rpm

Use this link for EPEL repository for 64 bit machines 

rpm -Uvh http://dl.fedoraproject.org/pub/epel/5/x86_64/epel-release-5-4.noarch.rpm

--PoolPro 23:35, 26 February 2012 (UTC)

GIT Install

Since we added the epel repo, GIT can be installed via YUM 

yum -y install git

FreeSWITCH Install

Then use the following 

cd /usr/src/
git clone -b v1.4 https://freeswitch.org/stash/scm/fs/freeswitch.git
cd /usr/src/freeswitch
./bootstrap.sh

Edit modules.conf to enable or disable desired modules. To enable a few extra features you may want to go ahead and edit modules.conf. Remove the # in front of the lines with these modules: 

mod_rtmp
mod_directory
mod_callcenter
mod_tts_commandline
mod_dingaling
mod_flite
mod_shout
mod_pocketsphinx
mod_cidlookup


Complete the FreeSWITCH compile. 

./configure
make install
make samples

8 kHz Standard Audio 

make sounds-install
make moh-install

16 kHz High Definition Audio 

make hd-moh-install
make hd-sounds-install

32 kHz Ultra High Definition Audio 

make uhd-moh-install
make uhd-sounds-install

48 kHz CD Quality Audio 

make cd-sounds-install
make cd-moh-install



+---------- FreeSWITCH install Complete ----------+
+ FreeSWITCH has been successfully installed.     +
+                                                 +
+       Install sounds:                           +
+       (uhd-sounds includes hd-sounds, sounds)   +
+       (hd-sounds includes sounds)               +
+       ------------------------------------      +
+                make cd-sounds-install           +
+                make cd-moh-install              +
+                                                 +
+                make uhd-sounds-install          +
+                make uhd-moh-install             +
+                                                 +
+                make hd-sounds-install           +
+                make hd-moh-install              +
+                                                 +
+                make sounds-install              +
+                make moh-install                 +
+                                                 +
+       Install non english sounds:               +
+       replace XX with language                  +
+       (ru : Russian)                            +
+       ------------------------------------      +
+                make cd-sounds-XX-install        +
+                make uhd-sounds-XX-install       +
+                make hd-sounds-XX-install        +
+                make sounds-XX-install           +
+                                                 +
+       Upgrade to latest:                        +
+       ----------------------------------        +
+                make current                     +
+                                                 +
+       Rebuild all:                              +
+       ----------------------------------        +
+                make sure                        +
+                                                 +
+       Install/Re-install default config:        +
+       ----------------------------------        +
+                make samples                     +
+                                                 +
+                                                 +
+       Additional resources:                     +
+       ----------------------------------        +
+       http://www.freeswitch.org               +
+       http://wiki.freeswitch.org              +
+       http://jira.freeswitch.org              +
+       http://lists.freeswitch.org             +
+                                                 +
+       irc.freenode.net / #freeswitch            +
+                                                 +
+-------------------------------------------------+


To upgrade FreeSWITCH in the future do the following: 

cd /usr/src/freeswitch
make current

FreeSWITCH Auto Start

Copy the sample-init-file to /etc/init.d/ 

 cp build/freeswitch.init.redhat /etc/init.d/freeswitch

Replace /opt/freeswitch with /usr/local/freeswitch in the /etc/init.d/freeswitch 

sed -i 's/\/opt\/freeswitch/\/usr\/local\/freeswitch/g' /etc/init.d/freeswitch

Set the permissions and add it to run on startup 

chmod 765 /etc/init.d/freeswitch
/sbin/chkconfig --add freeswitch
/sbin/chkconfig --level 5 freeswitch on
/sbin/chkconfig --list freeswitch

FreeSWITCH conf

Disable the following files but leave them for examples 

cd /usr/local/freeswitch/conf/dialplan/default
mv 00_ladspa.xml 00_ladspa.noload
mv 00_pizza_demo.xml 00_pizza_demo.noload
mv 01_Talking_Clock.xml 01_Talking_Clock.noload


SELinux

Can create problems for file access and running services. The following link describes how to disable SELinux.

http://www.crypt.gen.nz/selinux/disable_selinux.html

Database

SQLite

Is installed with PHP

PostgreSQL

Postgres 8.4 or higher is required. The following instructions install version 9.0 Replace the custom-username and custom-password with the account information.

http://wiki.postgresql.org/wiki/YUM_Installation (additional information)

Locate and edit your distributions .repo file, located: [base] and [updates] sections 

nano /etc/yum.repos.d/CentOS-Base.repo

To the section(s) identified above, you need to append a line: 

exclude=postgresql*

Download and install PGDG RPM file 

wget  http://yum.postgresql.org/9.0/redhat/rhel-5-i386/pgdg-centos90-9.0-5.noarch.rpm
rpm -ivh pgdg-centos-9.0-5.noarch.rpm
yum install postgresql90-server
service postgresql-9.0 initdb
/sbin/chkconfig postgresql-9.0 on
service postgresql-9.0 start
su postgres
psql
CREATE ROLE custom-username WITH SUPERUSER LOGIN PASSWORD 'custom-password';
\q
exit
sed -i 's/ident/md5/g' /var/lib/pgsql/9.0/data/pg_hba.conf
service postgresql-9.0 restart

MySQL

Check to see if MySQL is installed 

yum --enablerepo=webtatic list mysql55 mysql55-server

If it is installed then update it to a newer version 

yum --enablerepo=webtatic upgrade mysql55 mysql55-server

If it is not installed then add it 

yum –-enablerepo=webtatic install mysql55 mysql55-server
/sbin/chkconfig mysqld on
service mysqld start

Set the root password 

mysqladmin -u root password new_password_here
mysqladmin -h 127.0.0.1 -u root password new_password_here

PHP

yum --enablerepo=webtatic install php php-common php-pdo php-soap php-xml php-xmlrpc 
yum --enablerepo=webtatic upgrade php php-common php-pdo

For PostgreSQL add 

yum --enablerepo=webtatic install php-pgsql

For MySQL then add 

yum --enablerepo=webtatic install php-mysql mysql-connector-odbc

Install PHP Fast CGI 

yum --enablerepo=webtatic install php-fpm
/sbin/chkconfig php-fpm on

Web Server

There are multiple choices for a web server to use. These instructions focus on nginx because it takes very little server resources and scales well.

NGINX (pronounced: engine x) 

yum --enablerepo=webtatic install nginx
/sbin/chkconfig nginx on

Add the following directories. 

mkdir /etc/nginx/sites-available
mkdir /etc/nginx/sites-enabled

Remove the original config and add a more flexible one. Don't try to paste these in all at once because the "rm" and the wgets will make you miss something following. 

cd /etc/nginx
rm nginx.conf
wget http://www.fusionpbx.com/downloads/centos/nginx/nginx.conf
cd /etc/nginx/sites-available
wget http://www.fusionpbx.com/downloads/centos/nginx/fusionpbx.conf
ln /etc/nginx/sites-available/fusionpbx.conf /etc/nginx/sites-enabled/fusionpbx.conf

OpenSSL

Make sure the /etc/ssl directory exists 

mkdir -p /etc/ssl

Change the directory 

cd /etc/ssl

Generate a private key: 

openssl genrsa -des3 -passout pass:fusionpbx_cert_password -out fusionpbx.ssl.key 1024

Remove password from private key: 

openssl rsa -in fusionpbx.ssl.key -passin pass:fusionpbx_cert_password -out fusionpbx.ssl.key.nopass

Create a CSR (certificate signing request): 

openssl req -new -key fusionpbx.ssl.key.nopass -out fusionpbx.ssl.csr -subj "/CN=fusionpbx/OU=Project/O=FusionPBX/L=Boise/C=US"

Generate self-signed cert: 

openssl x509 -req -days 3650 -in fusionpbx.ssl.csr -signkey fusionpbx.ssl.key.nopass -out fusionpbx.ssl.crt

FusionPBX

Download FusionPBX source and add it to the web server directory. 

cd /var/www
svn checkout http://fusionpbx.googlecode.com/svn/trunk/fusionpbx /var/www/fusionpbx

If you get an error: 'svn: command not found.' Then add subversion. Then run the svn checkout again. 

yum install subversion

Permissions

There are multiple ways to handle permissions. FreeSWITCH creates some file on demand such as voicemail and does not give the necessary group permissions because of that the following method is currently recommended. This method adds the www-data user, changes ownership of the files to use www-data and then make the php-fpm and freeswitch services run as www-data. 

/usr/sbin/adduser www-data
chown -R www-data:www-data /usr/local/freeswitch
chown -R www-data:www-data /var/www/fusionpbx
sed -i 's/user = apache/user = www-data/g' /etc/php-fpm.d/www.conf
sed -i 's/group = apache/group = www-data/g' /etc/php-fpm.d/www.conf
sed -i 's/${FS_USER-freeswitch}/${FS_USER-www-data}/g' /etc/init.d/freeswitch
chown -R www-data:www-data -R /var/lib/php/session


Network Time Protocol

If NTP is not installed then install it. 

yum install ntp
chkconfig ntpd on
ntpdate pool.ntp.org
service ntpd start

If NTP is running then do the following: 

service ntpd stop
ntpdate pool.ntp.org
service ntpd start

Fail2ban

Brute force attacks are common. If the SIP and RTP ports are exposed to the Internet then it is important to install and configure Fail2ban. Fail2ban can be configured to analyze the FreeSWITCH logs. When attacker are identified it blocks the offenders. 

yum install fail2ban
cd /etc/init.d
/sbin/chkconfig fail2ban on

The configurations directory is 

/etc/fail2ban

For more info go to Fail2Ban

Start the remaining services

Start php-fpm (Without doing so will result in ERR 502 BAD GATEWAY) 

service php-fpm start

Start FreeSWITCH 

service freeswitch start

Start nginx (Web Server) 

service nginx start

Browser

To complete install go to the ip address or domain of the server in your web browser. You can use http or https and follow the instructions.

Login

After completing the install the default login information is whatever you set during setup after your initial connection to the web page.

Defaults used to be:

user: superadmin

pass: fusionpbx

System setup now makes you choose

TDM notes

Optional TDM card notes. These notes have not been updated in a while. CentOS Install TDM

Additional Notes

How to start stop FreeSWITCH 

service freeswitch start
service freeswitch stop

How to start, stop and restart nginx (Web Server) 

service nginx start
service nginx stop
service nginx restart

Change the CentOS root password 

su root
passwd

Alternate method

You can follow next directions to install the software using RPMS. It has been tested on Centos 6.6 and 7.

Retrieved from "http://wiki.fusionpbx.com/index.php?title=CentOS_Install&oldid=3490"